Shenzhen Eurotubes Electronic Co., Ltd.
Main products:Soldering Pot,Automatic Taper Cutler,Soldering Tip,Anti-Static Cloth,Ionizing Products
Contact Us
  • Contact Person : Ms. Zeng Linda
  • Company Name : Shenzhen Eurotubes Electronic Co., Ltd.
  • Tel : 86-755-88299845
  • Fax : 86-755-88354179
  • Address : Guangdong,Shenzhen City,Room 410,Huangjia Center, Donguan 1st Road,Longhua ,Bao'an District,Shenzhen,China 518109
  • Country/Region : China
  • Zip : 518109

New Automatic Scerw Spplier

New Automatic Scerw Spplier
Product Detailed
1: one machine can use many size scerws. 2.easy to adjust, easy to opeartion. time of pick up the scews in production.

1.Applicable to several specifications screw with one equipment,

1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), Applicable to special screws, even 1:1 short screws, screws with washers .

2.It is easy to adjust track! The track can be pulled out to adjust freely! Easy to understand and operate! 3.Have not stuck screw condition4.Screws move with the roller and fall at the high position, the screws, which did not enter the track will move into the next cycle. The working speed can be adjusted by adjust the vibration strength ,screw does not shake at the taking point . Feeding and vibration-driven are independent controlled, the stop delay time can be set freely, the equipment will launch failure alarm at non-normal conditions! Operation is as easy as other screw equipment! When you take the screw, you do not have to pay special attention to the position of the screw head, you only need to put the drill tip into the guide, then slide along the guide, the screw will be pulled out. Compared with traditional screws, this equipment can save 1.4 seconds each time, productivity increased by 4 times;5.Easy to operate, even novices can quickly learn how to operate.Don’t need aligning the screw,    just put screws into the hopper;6.Widely applied to many screw types with different length and head shape; Compact, less space. Auto-guide, working with the electrical or wind screwdriver, won't block screw. It is ideal product to replace the traditional products. This mode has counting function , 0-9999 can be set , and launch alarm at the set number.

Screw machine parameters


For various types of screws including screw with washer (Maximum L = 20MM)


2 screws/second


AC220V   size 180mm×125mm150mm




Instructions ,allen wrench, DC power supply (input 180-220V ,Output DC 12V)

New Automatic Scerw Spplier

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.